Charge Power Management System

Rating:

100 % of 100

The CHARGE Marine Power Management Station gives you power where, how and when you need it.CHARGE does the work of a traditional battery charger, a charge-on-the-run, plus an emergency start system all in one compact unit. CHARGE automatically devotes more power to the batteries that need it the most for maximum efficiency, giving you more time on the water.

Features:

Automatically moves power back and forth between cranking and trolling batteries
Displays battery voltage and status data on your smart phone or Lowrance unit (requires CM2 GATEWAY).
Complete battery maintenance - uses float mode when plugged in at home

Charges on the run from the alternator while the motor is running

Works with all battery types – lead acid, AGM, GEL, lithium or TPPL

Built-in emergency power transfer

WARNING: California Proposition 65

Support your local dealer

$1,999.99

CH-500W

Power-Pole direct pricing

Sold out

Check with your local dealer for limited stock

Currently On Back Order

Skip to the end of the images gallery

Skip to the beginning of the images gallery

WARNING: California Proposition 65

Questions about the difference in pricing between dealers and Power-Pole Direct? Learn More

Overview

An Intelligent Power Management System

This 500-watt power station delivers up to 40 amps of charging power to the cranking battery and up to 25 amps to the trolling batteries and works with multiple battery types including lead acid, AGM, GEL, lithium or TPPL. With the C-Monster app, you’re able to monitor your battery status in real-time and prioritize either the trolling or cranking batteries when recharging. The CHARGE will automatically maintain minimum power levels based on your preference settings.

Compact Design

The main CHARGE unit is 10.62x7.95x2.78 inches in size and weighs under nine pounds making it small enough to fit into your boat with ease. Since the CHARGE is an all-in-one unit it also can take the place of current chargers and jump start systems, freeing up even more valuable space on your vessel.

Intuitive Display Options

The CHARGE automatically displays battery status using an easy-to-read LED light system or you can receive more in-depth battery voltage and status data on your smart phone or compatible Gateway-equipped MFD.

Simple to Install

The CHARGE can be installed quickly and easily with just four screws. The easy-to-follow wiring instructions uses your boat’s existing shore power and alternator system meaning there is no complicated splicing or advanced electrical knowledge needed. Just use the diagram to configure your boat’s battery banks.

Built-In Safety Features

From the integrated heatsink cooling system to the temperature sensors built into the wiring sheath, the CHARGE was engineered for safe operation even under the most demanding conditions. The CHARGE is also constructed to IP65 waterproof standards to avoid possible water intrusion into the unit’s inner components.

Wiring Sheath

Compatible MFD's

(Requires C-Monster Gateway.)

Simrad

NSO Evo3
NSO Evo2
NSS Evo3
GO 5 XSE
GO 7 XSR
GO 9 XSE
GO 12 XSE
IDS
All 2020
and newer MFD's

Lowrance

HDS Live
HDS Carbon
Elite Ti2

Mercury Vessel View

Works With Existing MFD's

(Sold Separately.)

With the C-Monster GATEWAY, you can connect and control your CHARGE from your LOWRANCE, SIMRAD or Mercury Vessel View displays.

Specifications

Specifications
Total weight	8.75 lbs
Power supply	Up to 500 watts of power
Dimensions	Height: 10.62” Width: 8” Depth: 3.03”
Output	Max 40 amps to the engine battery Max 25 amps to the auxiliary batteries Max 500W 12V engine battery charge from shore power Max 500W 24/36V "run charge" from 12V engine battery and/or shore power Max 500W 12V "back charge" from Auxiliary 24/36V battery to engine battery
IP Rating	IP65
A/C Input	120v 60Hz